DO IT YOURSELF
Use the first leg as a template
for the final length for all.
Cut the second leg.
Make the second leg cut.
Cut a 2x4 at the 10-degree
way. Alignment is better with
tighter holes. Rigidity is
Bolt the first pieces together,
using a washer under both the
head and nut. Snug up the
nuts, but not to final tightness.
Now, move on to the second
leg. Use shim stock to make
up for the bolt ends lifting the
first leg a bit, align, clamp and
drill. Bolt together as before,
making sure to use washers
on both sides.
Turn the leg set over. Square
it with the top of your workbench.
Measure up 10 inches from
the bottom of each leg and
align the lower brace to the
inside of the leg. Clamp securely in place, and mark for the
bolt holes, again in a triangle
Pro-Pak Introductory Offer
See our website for details.
ENERGY CONSERVATION PRODUCTS
FOR YOUR HOME
R- 50 Attic
Seal these overlooked drafts!
Also whole house fan seals, and more!
Buy Factory Direct and SAVE!
visit us online at
Battic Door Energy Conservation
P.O. Box 15, Mansfield, MA 02048
email: email@example.com • Tel. 508-320-9082