PRODUCTSHOT
PUSH-IN WIRE CONNECTORS FOR THE DIY’ER
A common dilemma faced by the do-it-yourselfer is an electrical wire far too short to allow safe installa-
tion of a lighting fixture, switch or receptacle. Ideal Industries now offers the SpliceLine push-in wire
connector, an innovative solution to lengthening wires cut too short or that have deteriorated or broken
with age, requiring replacement. In these situations a SpliceLine connector can be safely used to
install additional wire to the device. Due to the shell’s ultra-slim profile, SpliceLine connectors take
up only a fraction of the space inside housings or electrical boxes than ordinary wire connectors.
Plus, the SpliceLine’s casing is made from a transparent polycarbonate that permits visual inspection
of connections once they’re completed.
No time-consuming crimping, soldering or
heat shrinking is required—just push-in
the wires, and the connection is com-
plete. SpliceLine’s two ports support a
wide range of solid and stranded wires
( 12-20 AWG solid, 12-16 AWG stranded)
allowing a single connector to cover
the same wire range as three standard
connectors. Learn more at
www.idealindustries.com.
