First step in assembly is to screw two brackets to the under- side of four 32-in. shelf boards, flush with the ends. Screw on the outer boards first, and then space the two inner boards equally (about 1/2 in. apart). This com- prises the top shelf. Next, partially assemble the middle and lower shelves by fastening the two inner 32-in. boards flush with the outer edges of the shelf brackets. Leave the outside boards off at this point. After cutting the legs to length, simply slip the legs through the holes in the shelf brackets. Screw the bottom shelf in place first. Determine the height of your mid- dle shelf, check with a level and fasten it securely. Predrilled holes in the brackets will indicate fas- tener locations. The top shelf installs last. After each shelf is fastened, measure between the 2x4 legs to determine the length of the final outside shelf boards. Cut to fit and install, which completes the unit. WALL-MOUNTED STORAGE Optimizing wall space for storage is an excellent way to economize space, and a wide variety of wall systems have flooded the market, offering modular hooks, straps, shelves, baskets and platforms Six shelf brackets are the cornerstone of the 2x4 Basics three-tiered storage unit.
The shelves simply slide over the 2x4 legs. Fasten the shelf brackets in place and then complete the lower and middle shelves by cutting 2x4's to fit between the legs.
Assemble the shelves first.
2-packs or 5-packs
Saves Time and Effort When
Cleaning Small Surfaces,
Edges & Grooves
• Pen-shaped design easy to keep handy
• Unique rounded tip – better
scraper than a fingernail
• Second flat-edged tip – won’t
scratch like a screwdriver
• Remove stickers, tape, caulk,
putty, grime & more
• Perfect for home improvement projects
Visit us at www.scrigit-scraper.com or Amazon