and protect them from dust and debris. If any of the planks have an open knot, simply use the “black dot stickers” (included with each box of planks) behind the knot to hide the wall. To do this, place the plank in its desired location before removing tape liner. Mark
any open knots on the wall with a pencil. Remove the plank and place a black dot sticker over the pencil mark. To place a plank in its final position, remove the tape liner, align the plank along the refer- ence line or adjacent plank with a slight angle so only the edge is touching. Make any necessary adjustments and lightly press the plank into place.
The best case scenario is that your ceiling and floor are level and parallel.
If the ceiling and floor are parallel within 1/4" (and the ceiling is fairly level), you can use the ceiling as a reference point to start the first row.
