POCKETJIG100 Also from Milescraft, thePocketJig100 (#1321) gives you a quick and easy way to join workpieces with pocket screws and make small repairs around your house. The compact design allows you to do applications where a small jig is required. There are four common board thickness settings built into the jig: 1/2-, 3/4-, 1- and 1-1/2-in. ( 12, 19, 27, 38mm), virtually eliminating the need for manual measurements. The jig includes the following: single barrel pock- et-hole jig, drill bit, 6” T20 driver, stop collar and hex key. This kit does not include the T20 screws that go with the driver, but they can be purchased separately. Any screws and driver can be used with this jig. Visit www.milescraft.com.
GRIZZLY T27417 EDGE
BELT AND SPINDLE
SANDER The Grizzly Model T27417 Oscillating Edge Belt and Spindle Sander has a 1⁄2-HP, 120V, sin- gle-phase motor that rotates at 11,500 RPM. It quickly converts from belt to spindle operation with the included spindle nut wrench. The T27417 features
1⁄2-in. spindle and 3⁄4-, 1-, 1-1⁄2-, and 2-in. diameter sand- ing drums with matching sleeves. Spindle speed is variable from 0–2000 RPM with 58 oscillations per minute. The sanding belt measures 4x24-in. and turns at a speed of 1,575 FPM. The table tilts 0– 45 deg. with detents at 0, 15, 22. 5, 30 and 45 deg. Visit www.grizzly.com.
TRACK SAW The new FlexVolt 60V Max 6-1/2-in. Track Saw (DCS520) combines the convenience of cordless power with the preci- sion, portability and versatility of a corded track saw. With an efficient brushless motor, specially designed transmission, and precision-ground woodwork- ing blade to minimize deflection, the track saw delivers a finished edge just like a table saw. The Track Saw is capable of an on-track cut depth of 2-1/8 in. (54mm) at 90 deg. and 1-5/8 in. (41mm) at 45 deg. Included is a
depth scale to accurately indicate exact depth of cut. The scale accounts for the thickness of the track from the bottom of the track down to 1/16 in. With straight plunge and a parallel-link plunge mechanism, the saw can be used in a variety of orientations. A dual-edge track allows for fast setup and long anti-splinter guard length. In addition, a rail adjust- ment feature allows the saw to be accurately adjusted.
CUTTER The Domino connecting system unifies the benefits of all previously existing joinery systems: the stability of mortise and tenon, the flexibility of bis- cuits used in furniture making, and the precision of the round dowel used in shelving. The key is the Festool Domino Cutter’s