patented pendulum routing move- ment and the resulting mortises for accepting the specially formed dominos. This is a completely new wood connecting system, which ensures the highest possible sta- bility, works simply and with con- siderably shorter setup time than traditional methods. It can be used for tasks that were previously only accomplished on stationary
machines. These new connectors allow for rapid assembly of flat joints or corner joints utilizing Domino fasteners for knockdown design. This allows for rapid build- ing, moving, and reassembling of large pieces. Visit festoolusa.com.
TG Tools KIK® HS Brad Point Bit
The KIK® HS Brad Point Bit has a unique tip design allowing it to bore wood, plastics and sheet metals exceptionally
fast, clean and easy. The tip contains 20% more cutting surface. To accommodate the speed with which this bit drills,
the flutes have an additional extraction ridge to clear the bore con-tinuously and efficiently. The tip design permits
plastics, laminates and even acrylic sheet to be drilled without melting, clogging or melting. Sheet metals are drilled
with no burr left behind. KIK® HS Brad Point Bit are available in standard jobber lengths and 8-1/4 extended length.
The extended lengths have a hole near the tip for pulling wires through the hole with the bit that made the hole!
TG Tools KIK® Spade Bit
Conventional spade bits can only drill holes in wood and can
only go in a single direction. The "revolutionary" design of
the KIK® Spade bit from TG Tools allows it to drill, wood,
laminates, plastic and even non-ferrous sheet metal. In wood, the KIK® Spade bores
faster due to 30% more cutting surface. By eliminating the brittle tang found on com-
mon spade bits, the KIK® Spade can even bore curved holes for those tight plumbing
and electrical installations. On plastics and laminates,
the KIK® Spade bores efficiently without melting the
material and will not "slip" or "skate" from the start.
With six cutting edges and more cutting surface, Chrome
Vanadium 40 Steel was chosen for manufacture to allow
the bit to flex when necessary in those tough situations
when others simply bend and break.
KIK® Forstner Bit
Made from 60 Carbon Steel and Titanium-coated, the KIK®
Forstner Bit from TG Tools drills, routs and channels wood,
plastic, acrylic and more. The bit operates smoothly in any
direction—even curves—making it easy to control. Bore the
hole the way the conduit or pipe bends. Correct misaligned inlets. Bore
blind holes without piercing thin laminate. It's a great bit for hinge or anchor inserts.
Plus, the open cap design prevents clogging, and the three-flat shank means less chuck slippage. Also, the bit includes a free heavy-duty protective case.
800-687-4122 • www.mytgtools.com • See us at the RDJ Show: booth #525