HITACHI 15 AMP 10 IN.
JOBSITE TABLE SAW The new Hitachi 10 in. jobsite table saw (C10RJ) with fold- and-roll stand features a 15 Amp motor with 4,500 RPMs to powerfully and easily rip through tough hardwoods. The stand is designed with sturdy legs for easy set up and break
down, providing stability while in use. The C10RJ stand also incorporates durable wheels to ensure the user can maneuver through tough terrain with ease. Capable of a 3-1/8-in. cut at 90 degrees and 2-1/4-in. cut at 45 degrees, this table saw provides convenient on-board storage for the push stick, blade guard, anti-kickback pawls and other accessories. Visit hitachipowertools.com.
KREG RIP-CUT Kreg makes it easy to cut sheet goods with the new Rip-Cut, a tool that turns an ordinary circular saw into a precision edge-guided cutting tool. The Rip-Cut makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. Whether you’re making rip cuts or crosscuts, (up to 24-in. wide), the Rip-Cut does it with simple setup, precise accuracy and great saw control— and without having to mark and measure each cut. It utilizes a long edge guide that follows the straight edge of the sheet you are cutting. The extra-long guide supports the saw at the beginning, during, and at the end of the cut. A large hand-hold in the guide makes it easy to grip and adds great control. That edge guide is connected to an aluminum rail that holds your saw on a universal saw sled. The rail has a built-in measuring scale, so all you have to do is lock the saw in at the measurement you want—up to 24 inches— and then make your cut by holding the edge guide against the edge of the sheet as you push your saw along. Visit kregtool.com. SENCO FINISHPRO 30XP Senco introduces its smallest and lightest 15-gauge tool for trim and fine woodworking. The new FinishPro 30XP, with a magnesium main body that weighs just 3. 8 lbs., is one of the lightest 15- gauge tools available, maximizing ease-of-use. Measuring 12 inches in length and 9-5/8-in. high, it is also extremely maneuverable in tight spaces such as cabinets, while strong and durable enough to handle a range of finish and trim projects. The FinishPro 30XP accepts 1- to 2-in. 15-gauge 34- deg. angled strip finish nails. Its E-Z Clear latch virtually eliminates fastener jams and associated downtime, and its NeverLube