but weather protection is not compromised because the roofs overlap.
Learn more about the Roof Riser brackets at www.skylifthardware.com.
Cut an access hole (minimum 3-1/2” x 6” to 9”) through the roof decking/sheathing to reveal the wall’s top plate.
Insert the Roof Riser Bracket through the hole and attach to the exterior wall’s top plate using four 1/4x3” Simpson Strong-tie SDS screws (included).
Remove the SkyLift Saddle and fit a standard pipe jack flashing (not included) over the bracket column. Then, cut and fit the roofing (removed earlier) around the pipe jack flashing.
Replace the SkyLift Saddle and bolt it to the column (3/8” bolt and nut included). A beam can then be bolted onto the saddle.
The beams can be configured in a number of ways to accommodate various project applications.