Q8 LOG OIL
The Only One-Step Deck Stain and
End Cut Solution in the Industry
Meets requirements for treatment of cuts and holes in pressure treated wood during construction.
Meets all pressure treated wood warranties and helps protect from termites and decay fungi.
lines on the floor even with the side jambs. Next, install the pocket-door header (with track assembly) to the jamb of the rough opening by screwing the supplied end- brackets to the wall studs. As mentioned already, this may require you to cut an oversized kit header to length, then reattach the bracket on one end. Carefully level the header before fastening to the brackets to the studs. The split studs attach to each side of the pocket-door header at the top; at the bottom, they’re mounted to the floor with a metal bracket that maintains the cor- rect spacing for the door to pass through. Each stud comes wrapped in heavy-gauge steel for extra strength and rigidity. Carefully plumb the split studs and screw
Make sure the header is perfectly level and square to the studs.
Screw the end-brackets securely to the jamb.