close properly inside the wall pocket. Test the door to make sure it opens and closes smoothly, then remove it and install wall- board over the door pocket. Use construction adhesive and 1-inch drywall screws. (If the screws are too long, it will inter- fere with the door’s operation.) Finish the wall to match the surrounding room. Finally, re-hang the door and then install the door guides on the inside and outside of the door at the mouth of the pocket. The adjustable guides center the door in the opening with enough clear- ance for it to slide smoothly. Install door casing to the jamb and split studs, and add a full- width strike jamb on the opposite side.
Install the two pairs on split studs on either side of the header chan- nel and make sure they’re plumb.
One pair of the studs must be located at the edge of the door opening. Screw them to the into the header.
Screw the split studs to the floor through the floor plate.
• CUSTOM DESIGNED
• HANDCRAFTED IN
STEEL & WOOD
OR ALL WOOD
Goddard Manufacturing Company
PO Box 502, Logan KS 67646
Toll Free: 800-536-4341
At Goddard Manufacturing Co., we specialize
in custom designed, handcrafted spiral
staircases - built to your specifications.
You can choose from several different styles
of spiral staircases and our professional
craftsmen can custom design a spiral
staircase to fit almost any application.
BUILT N THE