the nuts with a reciprocating saw equipped with a metal cutting blade. I put the box rail in position over the hanger wheels so I could measure from the bottom of the door to the lag screw hole on the box rail mounting bracket. I added one inch to this measure- ment to allow clearance between
the bottom of the door and the floor.
I used a stud finder to locate the center of the studs for the rail brackets. It's critical on this installation that the lag screws are mounted solidly into framing.
At one of the stud locations, I measured from the floor to mark the box rail bracket’s lag screw location.
Brake Kleen and a rag will help clean the protective oil off the box rail brackets.
BACK ON TRACK
The SpoutOff is 4 powder-coated 0.040 aluminum parts that increase the size
of all standard rain gutter outlets 4X. The SpoutOff also enables all users --
Homeowners, Facility Managers, etc. -- to remove their 1, 2 even 3-story
downspouts so they can check all outlets quickly and safely while standing
DOWN ON THE GROUND! No tools needed. No ladder needed!
(Note: A 2-story downspout only weighs about 6 pounds).
KEEP YOUR OUTLETS CLEAN AND WATER WILL ALWAYS FLOW OUT OF YOUR GUTTERS, EVEN IF THERE IS DEBRIS IN THE REST OF THE GUTTER.
( 1) Release ( 2) Take Down ( 3) Clean Out
JUST THREE EASY STEPS!
RAIN GUTTER COMPANY