be about right for the space so we picked up six sheets along with the supporting corrugated moldings.
After carefully exploring for irrigation pipes, we determined locations for two 4x4 posts just outside of the patio slab. We dug the post holes 8 ft. apart and made each 2 ft. deep.
We dropped the 4x4 posts into the ground and drove stakes so two 2x4 braces per post could be set with one parallel to the house and the other perpendicular to the house.
We mixed up a batch of Sakrete to set the posts.
We used our 4x4 posts to esti- mate locations for our two SkyLift roof riser brackets. We removed two pieces of composition shingle (one above the other) at each location for the SkyLift hardware.
We drilled two 1-in. holes through the roof sheeting (one for